Indoor wireless optical communication is a good alternative to existing mature RF technology. However various challenges in indoor optical wireless technology are due to free space loss, ambient light, and multi path dispersion causing inter symbol interference (ISI). The degradation in performance due to these facts is very much influenced by the channel topology. So in this paper the performance of indoor optical configuration has been analyzed using three types of channel topologies viz., directed (LOS), non-directed (LOS), and multi beam diffused link for various transmitter and receiver design parameters. The analysis has been carried using Optiwave simulation tools.
H. Elgala, R. Masleh and H. Hass (2011) “Indoor Optical Wireless Communication: Potential and State of the Art “, IEEE Communication Magazine. http://dx.doi.org/10.1109/MCOM.2011.6011734
S. Jivkova and M. Kavehard (2000) “Multispot Diffusing Configuration for Wireless Infrared Access,’’ IEEE Trans. on communications, Vol. 48:6, pp. 970-978. http://dx.doi.org/10.1109/26.848558.
P. Djahani, J.M. Kahn (1999) “Analysis of Infrared Wireless Links Employing Multibeam Transmitters and Imaging Diversity Receivers”, Global Telecommunication Conference. http://dx.doi.org/10.1109/GLOCOM.1999.831689.
Ke. Wang, A. Nirmalathas (2011) “High-Speed Optical Wireless Systems for Indoor Applications”, IEEE Phtonics Technology Letters, Vol. 23:8. http://dx.doi.org/10.1109/LPT.2011.2113331.
J.M. Kahn, J.R. Barry (1997) “Wireless Infrared Communications,’’ Proceedings of the IEEE, Vol. 85:2, pp. 265-298. http://dx.doi.org/10.1109/5.554222.
J.R. Barry, J.M. Kahn (1993) “Simulation of Multipath Impulse Response for Indoor Wireless Optical Channels,’’ IEEE Journal on Selected Areas in Communications, Vol. 11:3. http://dx.doi.org/10.1109/49.219552.
F.R. Gfeller, U. Bapst (1979) “Wireless In-House Data Communication Via Diffuse Infrared Radiation,’’ Proceedings of the IEEE, Vol. 67:11, pp. 1474-1486. http://dx.doi.org/10.1109/PROC.1979.11508.
| Periodicity | Biannually |
| Issue-1 | May |
| Issue-2 | November |
| ISSN Print | 2321-2217 |
| ISSN Online | 2321-2225 |
| RNI No. | CHAENG/2013/50088 |
Publisher's policy of the journal at Sherpa UK for the submitted, accepted, and published articles. Click OAPolicy
Plan-S ComplianceTo check compliance, one has to use the Journal Check Tool (JCT). This tool provided by cOAlition S (European funders) for the researchers (fundee) to check the compliance with the journal.
Recommend journal to your libraryYou can recommend the journal being a researcher or faculty member to your library. We will post a copy of the Journal to your library on your behalf at free of cost.
Click here: Recommend Journal
The authors are encouraged to submit the author’s copy (preprint) to appropriate preprint archives e.g. https://arxiv.org and/or on https://indiarxiv.org or institutional repositories (e.g., D Space) before paper acceptance by the editor of Journal. After publications of the paper author(s) should mention the citation information, title and abstract along with DOI number of the publication carefully on the required page of the depository(ies).
Contact: Phone: +91-172-2741000, +91-172-4691800
Email : editor.tmg@chitkara.edu.in;
This work is licensed under a Creative Commons Attribution 4.0 International License.
View Legal Code of the above-mentioned license, https://creativecommons.org/licenses/by/4.0/legalcode
View Licence Deed here https://creativecommons.org/licenses/by/4.0/
Journal of Technology Management for Growing Economies by Chitkara University Publications is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://tmg.chitkara.edu.in/
Chandigarh-Patiala National Highway, Punjab 140 401
Chandigarh Information Center SCO 160-161, Sector 9-C, Chandigarh 160 009
